PIRANHA

Hydraulic Ironworker

Model P50

MAXIMUM SPECIFICATIONS (rated on mild steel)

Punching 13/16” diameter through 3/4” plate

Throat Depth 8”

Bending 8” w/4-way die block

Round Bar Shear 1/4” through 1-1/2”

Square Bar Shear 1/2” through 1”

Plate Shear 15” x 5/8”, 10” x 3/4”, 4” x 1”

Angle Shear 5” x 5” x 3/8”

Coping/Notching 2-3/4” x 4” x 1/4”

Motor 10 HP

Weight 2,600 Lbs

STANDARD EQUIPMENT

Automatic Hold Down Set of Angle Knives

Punch Holder, Stripper, & Die Block Coupling Wrench

14 Punch & Die Sets 1/4” through 1-1/16” 3/8” Allen Wrench

8” Bending w/4-way Die Block Set of Chip Buckets

Set 1” Round Bar Knives Extra Filter Element

Set of 12-1/8” Plate Shear Knives Foot Switch

Set of Coper Knives Instruction/Parts Book/Video

Machines are shipped without hydraulic oil. Up to twenty gallons of Mobile DTE 13 or equivalent is required prior to startup. The machine is shipped totally wired through the electrical enclosure box.

A video and warranty registration card are delivered with the ironworker. The video describes the installation, start-up, maintenance and operation of the ironworker.

On-site assistance with rigging, leveling, start-up and training is available at extra cost.

WARRANTY

Twelve (12) months, covering parts against defects in materials or workmanship.