STANDARD EQUIPMENT

· ELGO 9521 NC Controller

· Fast and powerful Backgauge with 39.4” distance, moving by ballscrewed shafts, with automatic swing away feature

· Front support arms with ruler and flip-stop

· One-piece honed and chrome plated double acting powerful cylinders

· High quality top and bottom blades

Bottom: 4

Top: 2 Cutting Sides

· Easily adjustable blade gap adjustment system from single point

· Bosch-Rexroth hydraulic system

· High pressurized silent Atos pump

· Avoiding sheet sliding during cutting action, power holddowns with maximum performance

· Cutting length adjustment allowing stroke adjustment for shorter sheets and shorten the cutting time

· Roller bearing on the table to help placing sheets to machine easily

· Foot pedal available for single or continuous cutting

· Finger Guard

· Photocell (Sick) Rear Guard

· Cutting line illumination

ENGINEERING DESIGN FEATURES

The monoblock main frame and top beam are box construction and highly resistant to twisting forces.

Fast and precise blade gap adjustment for high quality cutting can be made from a single point.

The top beam is pivoted precisely and connected with special bearings. The back gauge system is fixed to the top beam so work piece jamming is avoided.

Holddown cylinders adjust their pressure according to sheet thickness. They can work separately so they can adapt for different thickness. Pressure surfaces of the holddowns are Polyamide so they don’t rust and deformations while using Aluminum or painted sheets are avoided. For safety reasons, the front side of the holddown is closed with a protection cover and upon customers’ request, part on the left side of this cover could be opened.

Backgauge movement is provided by guide shafts and ballscrew shafts with ±0.004” tolerance. Backgauge traveling distance is 39.4”. If a sheet bigger than 39.4” is to be cut, then the automatic swing-up function of the backgauge is utilized, thus cutting of sheets longer than 39.4” is possible. The back gauge has the retraction function to be used during the cutting process. With this function, deformation and jamming of striped sheets are avoided.